Ключевые слова: Tokamak, central coils, LTS, coils outer, NbTi, coils insert, Nb3Sn, coils pancake, control systems, measurement technique
Ключевые слова: HTS, bulk, cylinders, crack formation, mechanical properties, thermal stress, stress effects, pulsed magnetization, numerical analysis
Yan G., Feng Y., Zhang Y., Liu L., Chen X., Zhao Y., Chen Y., Li F., Yu Z., Tang X., Li T., Liu J., Sun X.
Ключевые слова: LTS, Nb3Al, wires, fabrication, PIT process, RHQT-process, doping effect, composition, microstructure, comparison, X-ray diffraction, magnetization, hysteresis, Jc/B curves, experimental results
Ключевые слова: vehicle applications, battery storage, review
Claudet S., Claudet S., Brodzinski K., Brodzinski K., Capatina O., Capatina O., Capelli T., Capelli T., Delprat L., Delprat L.
Ключевые слова: LHC, luminosity, cryogenic systems, design, helium superfluid, cavity, thermal performance, screen, modeling, numerical analysis
Ключевые слова: HTS, YBCO, doping, thin films, fabrication, TFA-MOD process, substrate LaAlO3, irradiation effects, proton irradiation, critical caracteristics, Jc/B curves, magnetization, critical temperature, X-ray diffraction, microstructure, critical current density, temperature dependence, experimental results
Ключевые слова: HTS, Bi2212, thin films, nanodoping, nanoscaled effects, nanoparticles, fabrication, sol gel process, texture, X-ray diffraction, microstructure, grain size, resistivity, resistive transition, critical temperature, critical caracteristics, Jc/B curves, critical current density, composition, pinning force, temperature dependence, experimental results
Ключевые слова: SMES, damping, control systems, design, oscillation, wind farms application, modeling, numerical analysis
Ключевые слова: HTS, YBCO, coated conductors, joints, solder, etching, contact characteristics, stabilizing layers, Cu-based conductors, mechanical properties, tensile tests, strain effects, stress effects, measurement setup, critical caracteristics, current-voltage characteristics, critical current, joint resistances, stress distribution, electromechanical analysis
Ключевые слова: power equipment, cables, HTS, REBCO, coated conductors, design, hybrid systems, cryogen transfer line, liquid natural gas, nitrogen liquid , ac performance, ac losses, design, design parameters
Ключевые слова: LTS, Nb3Sn, cable-in-conduit conductor, design parameters, degradation studies, measurement technique, numerical analysis
Ключевые слова: magnetic separation, HTS, YBCO, tapes, coils pancake, impregnation, design parameters, fabrication, test results, magnetic field distribution, joints superconducting , Bi2223/Ag, joint resistances, critical caracteristics, current-voltage characteristics, loads, magnetic field distribution
Ключевые слова: HTS, YGdBCO, TFA-MOD process, films, substrate LaAlO3, X-ray diffraction, microstructure, composition, critical caracteristics, Jc/B curves, fabrication
Ключевые слова: SMES, power compensator, battery storage, hybrid systems, design, prototype
Ключевые слова: HTS, YBCO, bulk, levitation performance, rotating characteristics, pinning, numerical analysis, experimental results
Ключевые слова: cryogenic systems, cryostat, magnetic systems, hybrid systems, magnets resistive, LTS
Ключевые слова: HTS, REBCO, coated conductors, strands, ac losses, numerical analysis, experimental results, magnetic field distribution, quasi-isotropic strand
Ключевые слова: current leads, Cu-based conductors, HTS, nitrogen liquid , fabrication, test results
Ключевые слова: current leads, heat leakage, series connection
Ключевые слова: HTS, coated conductors, quench, heat treatment, nitrogen liquid , FCL resistive, power equipment, YBCO, measurement technique, experimental results
Ключевые слова: presentation, HTS, coated conductors, heat transfer, width, uniformity, fault currents, resistance, liquid oxygen, quench properties
Ключевые слова: HTS, REBCO, doping effect, bulk, resistivity, temperature dependence, experimental results
Ключевые слова: bulk, cylinders, numerical analysis, flux flow, mechanical properties, stress effects
Ключевые слова: HTS, YBCO, substrate LaAlO3, TFA-MOD process, precursors, microstructure, critical caracteristics, critical current density, heat treatment, fabrication
Li C.S., Cardwell D.A., Yao X., Tao B.W., Xiong J., Sun L.J., Cheng L., Li T.Y., Wang C.L., Yan S.B., Feng J.Q., Xu X.Y.
Ключевые слова: HTS, YBCO, bulk, fabrication, seeding technique, films, REBCO, grain structure, microstructure
Ключевые слова: HTS, REBCO, bulk, fabrication, precursors, seed layers, buffer layers
Ключевые слова: HTS, YBCO, TFA-MOD process, substrate LaAlO3, fabrication, films
Ключевые слова: HTS, YBCO, TFA-MOD process, fabrication, phase formation
Ключевые слова: HTS, YBCO, double-side structures, films, magnetron sputtering, substrate LaAlO3, fabrication
Ключевые слова: HTS, YBCO, TFA-MOD process, humidity, films large-area, substrate LaAlO3, microstructure, resistive transition, fabrication
Ключевые слова: HTS, YBCO, films, MOD process, TFA-MOD process, substrate LaAlO3, microstructure, fabrication
Ключевые слова: HTS, YBCO, films, substrate LaAlO3, TFA-MOD process, fabrication, microstructure
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.